December 14, 2017

High Speed Single or Dual S.O.M. for Contacts

MACHINE NO. 1072

This machine provides continuous high speed secondary operations such as cross drilling, wiondow cutting, slotting, etc. for electrical contacts barrel parts, retention clips, pen tips, etc. The parts are firmly held in a jaw eliminating all play and vibration, and then moved to the spindel utilizing the minimum stroke, eliminating lost time motions and creating an optimum rate of up to 250 operations per minute. The machine is ideally suited for small cylindrical parts.

PART SIZES – Parts up to 1/2 inch in diameter by 2 inches in length, depending on type of operation.

DEPTH CONTROL – Stroke length and tool positioning are easilly adjusted by means of external control.

MACHINE CAPABILITY – One machine is capable of:
* cross drilling one or two holes.
* Cross drilling one hole and window cutting.
* Milling/solder pot cutting.
* Single or multiple slotting.

CYCLE RATE
* Cross drilling up to 250 pieces per minute
* Window cutting up to 150 pieces per minute.
* Milling cutting up to 150 pieces per minute.
* Slotting cutting tp to 120 pieces per minute.

MACHINE CONTROLS – Power on-off, feeder on, cam shaft drive motor on, spindle on, spindle variable speed control, feeder control.


Machine Archives: