Toilet and Sink Hose Assembly Machine
Hose material is fed from a reel to a cut-off station where tape is applied before cutting to eliminate fraying. Ends are then inserted and crimped into place.
Hose material is fed from a reel to a pre-set length. Tape is then wrapped around the hose at the location where it is to be cut. It then indexes to the cutting station where an abrasive saw cuts the hose in the middle of the applied tape. The hose is then taken to a station when ends are automatically bowl fed and inserted into each end. Once in place, the ends are crimped in place. The ends can be all types of configurations, including both male and female connectors.
- Machine Number: 6092
- Machine Controle: A solid state programmable controller operates the sequence with an easily accessible control panel including Main Power, Emergency Stop, Manual, Automatic, and Individual Operations controls
- Cycle Rate: Estimated 3 per minute
- Construction: Heavy duty welded and powder coated tubular frame with adjustable levelers. Materials and finishes used are appropriate for the work environment. This machine is designed to allow the operator full visual contact with all components being processed and easy access for routine maintenance
- Safety: Meets Meets OSHA Safety Standards. Safety sensitive areas of this machine are enclosed and accessed through interlocked doors which stop the machine when opened. Emergency Stop controls are provided which stop the machine when activated