Home » Machine Archives »
Machine No. 5016 (12, 6, and 1 Station)
These machines centrifugally mold elastomer products. The operator places a mold at the load station on the lower platen. The mechanical cam operated index table, indexes the arm. During this index the upper disc clamps the mold. When leaving the second station the motor is turned on and rotates the present RPM which can be verified on the display on each arm. The next station pours a predetermined amount of polyurethane through a large 4″ port into the mold. The media gets spread out in the mold through the centrifugal force. The mold moves to the next station where it stops rotating after which the upper clamp opens and the mold is removed and replaced with an empty mold. The mold is
The media gets spread out in the mold through the centrifugal force. The mold moves to the next station where it stops rotating after which the upper clamp opens and the mold is removed and replaced with an empty mold. The mold is demolded and prepped away from the machine to get maximum machine throughput.
MACHINE 5016-1 – This single station machine functions as -6 and -12 above and is mainly used for low production, R & D prototyping.
BASE – Heavy duty welded construction from four-inch square tubing kept open for total access and ease of cleaning.
INDEX TABLE – Heavy duty mechanical cam operated, variable speed with overload sensor and dynamic brake.
CENTER COLUMN – The outer rotary sleeve with arms rotates around the inner sleeve, supported by heavy duty sealed tapered roller bearings and between the sleeves filled with oil.
AIR – Is brought through the center column to the rotary union to each individual arm which holds a valve and a 4″ cylinder.
ARMS – Heavy duty welded construction with braces supporting the discs. Upper arm toggles pass the center for maximum clamping force. Easily adjustable for thicknesses of molds. Each arm has a control box which includes a motor variable speed pot, RPM readout, on/off switch and clamp/motor invert switches.
CYCLE RATE – Various depending on the amount of media required, average ten seconds.